WH Software Knowledge Base

How do I select the correct Silca UnoCode Classic machine?


When adding an Original/Classic UnoCode to the machine list you must choose if your machine is a version 1 or a version 2 machine.

The majority of these older machines are version 2 machines.


Select model "V2" and the correct Com port then read the firmware version, it will range from 2.00-3.03 if it is a version 2 machine.  Version 1 machines do not report their version number.

Identifying Machine Version Visually

On a version 1 UnoCode the two buttons on the side of the machine are horizontally aligned, on a version 2 UnoCode the same two buttons are vertically aligned.

Version 1 machine:
unocode version_1.jpg

Version 2 machine:
unocode version 2.jpg

Article Details

Last Updated
26th of October, 2011

Would you like to...

Print this page Print this page

Email this page Email this page

Post a comment Post a comment

Subscribe me

Add to favorites Add to favorites

Remove Highlighting Remove Highlighting

Edit this Article

Quick Edit

Export to PDF

User Opinions ( )

How would you rate this answer?

Thank you for rating this answer.

Related Articles

No related articles were found.