WH Software Knowledge Base

View Articles by Category

There are no sub categories
Add an article to this category

Category » InstaCoderss button

(Page 1 of 2)      Prev | 1 | 2 | Next

There were 40 articles found in this category:

  1. questionInstaCode - Server Installation
    Important information for Network Administrators when configuring a server installation. InstaCode Workstations access all data on the Server via a Windows Network Share called “ICDataFiles”. The Windows user on the Workstation must have full permissions to the shared folder. To aut ...
  2. questionWH Software products on Virtual enviroments
    WH Software products implement anti-piracy technology that ensures the software can only be activated on a single physical machine. As such WH Software products do not support virtual environments which are not provided stable hardware configurations by their host. All load balancing, dynamic d ...
  3. questionActivation error - other than a (3)
    InstaCode Activation Error (3) or not: When you go to activate, it will show on that window – Activation is required now (3). And this is what we want it to show (3) particularly. If anything else e.g. 4, 5, 6, 7 there is a problem. If this is the case, and it is showing anything oth ...
  4. questionVin to Key Code
    The prospect of calculating mechanical key codes from a vehicle’s VIN number is simply not possible. This is because of a number of reasons: There is no collation between the VIN and the key code. The reality is that when a vehicle is assembled then a random lockset is placed in the vehi ...
  5. questionWill InstaCode work on a Windows tablet?
    Instacode will run on a Windows tablet, yes, as long as it is a Windows OS. It will however, not work with Windows 8 RT. So you’d need to check this first as to which OS it was particularly. It will also run on Windows 8 or 8.1.
  6. questionHow do I get my data (clients, masterkeying, hooks, favourites & notes) from InstaCode onto my new PC?
    If you have a new PC and have a back-up of the user-data, you can simply restore the backup to your new PC. Following the instructions below: All you need to do on the new computer is restore the backup files from the old computer you have. The backup file on the old computer can be found in ...
  7. questionHow do I deactivate an existing Activation for InstaCode?
    In older versions of InstaCode (prior to 2014) to remove an existing activation you need to open InstaCode on the particular machine. Hold down the Shift key, while using your mouse pointer to select Setup on the Title menus, then Change Registration. Here you should now see a Deactivate butt ...
  8. questionMy PC has died how do I remove the allotted activation.
    When an organisation decides to upgrade their computers they systematically de-activate the software off the old computers. This procedure reinstates their activation count limit which will enable them to re-activate the software on new computers. If one of your computers has suddenly died and ...
  9. questionHow do I print a HPC 1200/Blitz/Ilco Universal II card from InstaCode?
    You need to have selected the machine you want in InstaCode... so best to first check this is done. To do this, open InstaCode and go the Setup menu & Machines. If you have previously selected it, it will display in this window as shown below: If it is not shown in this list, select Add. ...
  10. questionHow do I back up my data in InstaCode?
    InstaCode (from 2013 onwards) now does a automatic back up upon closing InstaCode. It saves this to the User Archive folder, located under the 9.0 folder. If you want to do a manual backup at any time, simply open InstaCode and select the Setup menu, then Backup user data. It will ask y ...
  11. questionInstaCode & the Silca Triax
    When communicating with a Silca Triax or a Silca Tri-Code/Viper machine, InstaCode only has the ability to call up the Silca on-board card via the Silca Serial Number (SSN) if it exists within the current Silca firmware. If this is the case, then InstaCode only provides/populates the bitting. ...
  12. questionCommunication problems with Silca UnoCode
    Setting up your Silca UnoCode is very straight forward with only two fields requiring correct selection. Com port 1 is normal for serial to serial communication, otherwise a USB to serial adaptor cable will generate a choice/com number in the dropdown box depending on which particular USB port ...
  13. questionDownload Instructions for InstaCode
    Save the download to a location you can easily find. Normally the latest OS's save to the Downloads folder so you can always check there. When the download is complete, double click on the ICSetup.exe file and step through the installation wizard. Following this you will be prompted for your ...
  14. questionKey Codes from VIN Numbers in InstaCode
    InstaCode does not contain information to allow you to cut a key from the VIN number. It is purely from the Key Code itself on the particular vehicle. Key codes can be obtained from a vehicles VIN number if you ask the right person at the appropriate manufacturer's vehicle dealership.
  15. questionI am getting an error in InstaCode saying: Cannot install onto Editor – Installation terminated
    This error was a bug back in 2010 that was fixed. So to get this error, you'd need to have inadvertently installed an old verision at some point or performed a windows restore. The fix: In "%PROGRAMDATA%\WH Software\IC\9.0" there will be a folder called "DataEnc". Delete it and then run the l ...
  16. questionDirect Connection between PC running IC or KAK with a single Bianchi machine (Ninja, 994, Versa, Dezmo)
    See attachment for information on the Direct Connection between a PC running InstaCode or Kreate A Key with a single Bianch machine (Ninja, 994, Versa, Dezmo).
  17. questionI am getting an error when trying to communication with my Silca Key Machine - Silca Error 5002?
    The most common error you will see when trying to communicate with a Silca machine is: Silca Error 5002. A simple process of elimination will solve the problem. Open the machine property window in InstaCode, check the COM port selection number corresponds with the actual com port the machine is ...
  18. questionI am getting a SRT10 error when trying to activate my InstaCode
    Check the date on your computer, it will be wrong. Put it back to the correct date and year and you will good to try again.
  19. questionMy InstaCode is asking me to activate again?
    There are a few reasons the program will ask to activate again. The most common reason is the computer’s date has been changed recently for some reason or InstaCode has detected a hardware change within the computer (Ram, Hard-drive, Motherboard, Audio/Video card) or a Windows update has ...
  20. questionHow can I activate my InstaCode if I am not connected to the Internet?
    Overview InstaCode must be activated before it becomes operational. There are two ways to activate InstaCode, so you may choose the solution that best fits your situation. If your computer is not Internet connected, use the second procedure, Manual Activation. Activation InstaCode When InstaCode ...
(Page 1 of 2)      Prev | 1 | 2 | Next